High temperature resistance of single core and multi-core direct welding insulated high temperature stranded film clad inverter
Self adhesive membrane wire
Process capability：
CT280/CT285 self-adhesive membrane wire:
0.25mm ～ 1.0mm (15 ～ 35M/min)
0.10mm * 7p~0.10mm * 300p (13~20M/min)
Product characteristics：
The insulation coefficient is better than that of ordinary insulated wire, and the production design can reduce the primary and secondary retaining walls
Product advantages (higher than peers)
1. Leading company of membrane cladding line, with professional R&D team and R&D equipment,
2. Good flexibility and strong mechanical stress resistance
3. It has absolute advantages in insulation, heat resistance and surface smoothness, and can be widely used in various high-frequency and high-voltage power conversion equipment
Hot melt adhesive tape film cladding wire
Process capability：
Hot melt adhesive tape film cladding wire
0.25mm ～ 1.0mm (15 ～ 35M/min)
0.10mm * 7p~0.10mm * 300p (13~20M/min)
Product characteristics：
Compared with self-adhesive wire, it has higher flexibility and smaller outer diameter
High temperature Mylar tape film covered wire
Process capability：
High temperature Mylar tape film covered wire
0.25mm ～ 1.0mm (15 ～ 35M/min)
0.10mm * 7p~0.10mm * 300p (13~20M/min)
Product characteristics：
High temperature resistance, strong toughness, easy adhesion, and the dielectric strength also exceeds that of a single material
Film coated wire, an electromagnetic wire coated with synthetic film or film of other materials as the insulating layer on the surface of the conductor or enamelled stranded wire according to a certain overlap rate. Our company's film coated wire has two internal structures, and different external films are used for different requirements, and different scenarios for the use of external films are also different
1. Four layers of insulated wire: PET+PTE+PA+PET tape (CT-280B/CT-285)
2. Four layers of insulated wire: ETFE+ETFE+ETFE+tape
3. High temperature insulated wire: polyurethane+PI tape (brown)
Due to high temperature resistance and high insulation, it is widely used in the field of high-frequency transformers, high-power transformers, magnetic rings, such as medical equipment, inverters, high-frequency inductors and transformers, wireless chargers, etc
